Product Sections

Adhesives

Cleaning Chemicals, Freeze Sprays & Aerosols

Clean Room Supplies

Dispensers

Gloves

Hand Tools

Lighting & Magnification

Material Handling & Storage

Packaging Supplies

Power Tools

Solder

Soldering & Desoldering

Static Protection

Swabs, Wipes & Cleaners

Test Equipment

Specials

Main Pages

HOME

BRAND INDEX

TERMS & CONDITIONS

Dispensers

Online Catalog | Dispensers

HYPO-25 Precision 2 oz. Dispenser/Oiler with Hypodermic Needle, 23-Gauge Needle

Precision hypodermic oilers can be used for greasing and oiling small parts with precise accuracy even in hard-to reach places. Each polyethylene bottle comes equipped with a one-inch hypodermic needle with dust cap. 23- gauge needle can be used for water-thin solvents and fine and super fine oils as well as light cements and medium weight oils. 2 oz. capacity. Round shape. Shown with protective cap. HYPO-25
Online Price: $2.50

quantity

Plato FD-2 2 oz. Flux/Liquid Dispenser, .020" Hypodermic Needle

Dispense a wide variety of liquids without dripping, spilling or waste. 2 ounce polyethylene squeeze bottle has a .020" dia. (.5mm) stainless steel capillary needle allowing the dispensing of flux or liquid to be applied with pinpoint accuracy. Needle length 1".
Online Price: $2.40

quantity

Plato FD-21 2 oz. Flux/Liquid Dispenser, .010" Hypodermic Needle

Apply a wide variety of liquids without dripping, spilling or waste. 2 oz. polyethylene squeeze bottle has .010" dia. stainless steel needle allowing the dispensing of fluid with pinpoint accuracy. Needle length 1".
Online Price: $2.40

quantity

Plato BC-250 8 oz. Flux/Liquid Dispenser

The BC-250 is an inexpensive way to wet sponges and dispense liquids at the work bench without waste. Polyethylene bottle has screw cap and dispensing tube. 8 oz. capacity.
Online Price: $5.80

quantity

Menda 35309 6 oz. One-Touch Solvent/Flux Dispenser

One-Touch stainless steel pump unit prevents the spilling and evaporation of potentially dangerous chemicals with an air-tight seal. Light pressure of a brush or swab pumps fluid to the surface only when needed and remaining fluids seep back down into the bottle. Protect against cross-contamination of chemicals. Translucent container allows for the easy viewing of contents. Molded polyethylene container has wide opening for easy filling. 4.35" high.

Online Price: $13.90

quantity

Menda 35312 8 oz. One-Touch Solvent/Flux Dispenser

Menda 35335 4 oz. One-Touch Tin Can Solvent Dispenser

Tin container allows for the storage of liquids that are not compatible with plastic. One-touch stainless steel pump unit prevents the spilling of potentially dangerous chemicals with an air-tight seal. Protect against messy chemical spills while reducing fumes, odors and the evaporation of highly volatile chemicals. Cross-contamination of products is significantly reduced or completely eliminated.

Online Price: $15.50

quantity

Plato SF-250 8 oz. Static Dissipative Flux and Liquid Dispenser

Wet sponges and dispense liquids at the work bench without waste. 8 oz. polyethylene squeeze bottle is permanently encased in static dissipative plastic. Meets mil. spec. DOD-STD-1686 and MIL-B-81705, Type 2.
Online Price: $12.35

quantity

Plato SF-02 2 oz. Static Dissipative Flux and Liquid Dispenser, .020" Hypodermic Needle

Dispense a wide variety of liquids without dripping, spilling or waste. 2 oz. polyethylene squeeze bottle has .020" dia. stainless steel needle for the pinpoint accuracy of fluid dispensing. Permanently encased with static dissipative plastic that meets mil. spec. DOD-STD-1686 and MIL-B-81705. Needle length 1".
Online Price: $7.90

quantity

Plato SF-01 2 oz. Static Dissipative Flux and Liquid Dispenser, .010" Hypodermic Needle

Dispense a wide variety of liquids without dripping, spilling or waste. 2 oz. polyethylene squeeze bottle has a .010" dia. (.25mm) stainless steel needle allowing the dispensing of fluid with pinpoint accuracy. Needle length 1". Bottle is permanently encased with static dissipative plastic and meets mil. spec. DOD-STD-1686 and MIL-B-81705.
Online Price: $7.90

quantity

Menda 35337 6 oz. One-Touch Static Dissipative Solvent Dispenser

Blue, static dissipative dispensers provide electro-static discharge protection while protecting the user from fumes, odors and messy chemical spills. Dispenser prevents the evaporation of Chemicals and cross-contamination of products. The 6-ounce pump dispenser has a surface resistivity of 10 (ninth power) to 10 (eleventh power) and can dissipate a charge of +/- 5000v in less than two seconds. Meets mil-specs MIL-STD-8120513 and NFPA code 56A. (Pictured left with 4 oz and 8 oz dispensers.)
Online Price: $13.90

quantity

SD-6-ESD 6 oz. Blue Static Dissipative Flux and Solvent Dispenser w/ Pump

Blue, static dissipative solvent dispensers provide electro-static discharge protection. The 6-ounce pump dispenser has a surface resistivity of 10/ninth power to 10/tenth power and can dissipate a charge of +/- 5000 volts in less than two seconds. The stainless steel Menda pump helps to prevent messy chemical spills and helps to reduce fumes, odors and evaportation of highly volatile chemicals while protecting against cross- contamination of products. ESD-safe dispensers will not react with solvents such as TCE or alcohol.
Helps to meet ESD-TR20.20-2000. (6 oz. dispenserFar left dispenser
Online Price: $14.50

quantity

FD-1-ESD 2 oz. Static Dissipative Flux / Dispensing Bottles, 26-Gauge Hypodermic Needle

These blue, static dissipative flux dispensers are non-static generating and have a surface resistivity of 10/ninth power to 10/tenth power. Dispensers can dissipate a charge of +/- 5000 volts in less than 2 seconds at 40% relative humidity. Includes 26 gauge needle.

Online Price: $5.95

quantity

FD-2-ESD 2 oz. Static Dissipative Flux / Dispensing Bottles, 20-Gauge Hypodermic Needle

WB-8-ESD 8 oz. Static Dissipative Solvent / Water Bottle

Blue, static dissipative water/solvent bottle has a surface resistivity of 10/ninth power to 10/tenth poower and will dissipate a static charge of +/- 5000 volts in less than two seconds at 40% relative humidity. Durable container is compatible with most common solvents like TCE and alcohol. Complies with DOD-STD-1686A, NFPA code 56A, DOD-Handbook-263 and helps to comply with ESD-TR20.20-2000.
Online Price: $6.35

quantity

Online Catalog | Dispensers