Product Sections

Adhesives

Cleaning Chemicals, Freeze Sprays & Aerosols

Clean Room Supplies

Dispensers

Gloves

Hand Tools

Lighting & Magnification

Material Handling & Storage

Packaging Supplies

Power Tools

Solder

Soldering & Desoldering

Static Protection

Swabs, Wipes & Cleaners

Test Equipment

Specials

Main Pages

HOME

BRAND INDEX

TERMS & CONDITIONS

GC Tools

Online Catalog | Specials | GC Tools

BURNISHING TOOL GC 9337 Contact Burnishing Tool

BURNISHING TOOL GC 9337 Contact Burnishing Tool

Burnishing tool consists of stainless steel strips, micro-scored to an ultra-fine file surface. Remove oxide and corrosion on relay and switch contact points made of platinum, paladium, molydenum, gold tungsten and silver. Recommended for use on small and miniature components.
Online Price: $0.89

quantity

SOLDER AID GC 9094 Brush & Scraper Soldering Aid

SOLDER AID GC 9094 Brush & Scraper Soldering Aid

Fine stainless steel brush and hardened steel scraper. 8" long. Plastic handle. Limited quantities
Online Price: $2.16

quantity

SOLDER AID GC 9093 Angle Reamer & Forked Tip Solder Aid

SOLDER AID GC 9093 Angle Reamer & Forked Tip Solder Aid

Handy, find point probe specially designed to aid in probing and solder printed circuit boards. Made with special stainless steel hardened probes that keep solder from sticking to the tool. 8" long. Plastic handle. Limited quantities
Online Price: $2.16

quantity

EXTRACTOR GC 12-4614 Spring Steel Extractor

EXTRACTOR GC 12-4614 Spring Steel Extractor

Economical tool will fit all LSI, MSI and SSI devices from 8-24 pins. One-piece construction. Limited quantities
Online Price: $1.99

quantity

PRINT KOTE SOLVENT GC 22-209 Print Kote Solvent, 2 oz. bottle

PRINT KOTE SOLVENT GC 22-209 Print Kote Solvent, 2 oz. bottle

A solvent to remove silicone and other types of protective coatings from PC boards. Required when modifying PC boards or replacing components where the protective coating interferes with the desoldering and resoldering operation. 2 oz. bottle. Limited Quanities
Online Price: $2.97

quantity

HEAT SINK COMPOUND GC 10-8120 Type 44 Non-Silicone, 1 oz. tube

HEAT SINK COMPOUND GC 10-8120 Type 44 Non-Silicone, 1 oz. tube

Compounded with 100% synthetic base stocks. Features excellent heat transfer efficiency, thermal stability, high flow rate, no separation, bleed or migration typical of silicone based greases. Meets Bellcore spec KS21334 and mil spec C-47113. 1 oz tube. Limited Quantities.
Online Price: $4.95

quantity

SILICONE GC 10-8108 Silicone (Z9), 0.5cc single-use tube

SILICONE GC 10-8108 Silicone (Z9), 0.5cc single-use tube

Industry standard zinc oxide filled silicone heat sink grease for most applications. Will not soften at elevated temperatures or dry out or harden. Meets mil spec. C-47113. Limited Quantites
Online Price: $1.19

quantity

Q-DOPE GC 10-3702 Q-Dope, 2 oz. bottle with brush

Q-DOPE GC 10-3702 Q-Dope, 2 oz. bottle with brush

Q-dope solution of pure polystyrene in solvents. Dries fast and leave a clear, protective coating on coils and transformers, with no or minimal effect on inductive values. May also be used as a cement for molded or fabricated items made of polystyrene. Limited Quantites
Online Price: $4.95

quantity

LIQUID TAPE GC 10-1762 Liquid Tape Insulating Coating, 2 oz. bottle with brush

LIQUID TAPE GC 10-1762 Liquid Tape Insulating Coating, 2 oz. bottle with brush

Heavy-bodied, black insulating coating which replaces insulating tape in applications where wrap-around tape could not readily be applied. Compound dries quickly to a strong pliable finish that will not crack, peel or chip. Water and oil proof. May be used outdoors to insulate any electrical terminal, connection or wire splice. Voltage rating 700v/mil (min.) Limited Quanties.
Online Price: $3.97

quantity

FLUX REMOVER GC 22-270 Flux Remover and Cleaner, 16 oz. Aerosol

FLUX REMOVER GC 22-270 Flux Remover and Cleaner, 16 oz. Aerosol

Removes all types of organic flux. Pinpoint application. Non ODC. Contains methylene chloride and isopropyl alcohol. Meets mil spec MIL-C-81302C Type II, MIL-T-81533A, MIL-C-10113. Limited quantities.
Online Price: $3.85

quantity

GREASE LUBRICANT GC 10-2302 Lubriplate Grease Lubricant, 1-3/4 oz. tube

GREASE LUBRICANT GC 10-2302 Lubriplate Grease Lubricant, 1-3/4 oz. tube

White, lithium soap base grease lubricant that provide superior lubrication and reduces friction and wear to a minimum. Suitable for use on wiping contacts. It retains consistency over a wide range of temperatures, will not oxidize or harden and provides outstanding protection against corrosion. 1-3/4 oz tube. Limited Quantites
Online Price: $1.64

quantity

SOLDERING TOOL GC AS-9440 Black Conductive Square & Hex Soldering Aid Tool

SOLDERING TOOL GC AS-9440 Black Conductive Square & Hex Soldering Aid Tool

Material: (anti-static) black conductive nylon, hex 0.100". Ends: 0.100" (2.5mm) hex, 3/8" (9.5mm) long, 1/16 0.062" -1.6mm) square, 1/32" (0.1cm) long. Total length: 5-1/6". Limited quantities
Online Price: $0.82

quantity

SOLDERING TOOL GC AS-8608 Black Conductive Miniature Potentiometer-Trimmer Adjustment Tool

SOLDERING TOOL GC AS-8608 Black Conductive Miniature Potentiometer-Trimmer Adjustment Tool

Material: (anti-static) conductive nylon shaft: 1/4" (6.3mm) diameter, 5" (12.5cm) long. Ends: .085" (2.2mm) wide steel tip, .085" (2.2mm) wide steel tip, .085" (2.2mm) wide steel tip, recessed .040". Total length: 5". Limited quanties.
Online Price: $1.18

quantity

SOLDERING TOOL GC AS-8606 Black Conductive Hex & Special Tip Tool

SOLDERING TOOL GC AS-8606 Black Conductive Hex & Special Tip Tool

Material: (anti-static) conductive nylon, hex 0.100". Ends: flat screwdriver tip (0.027" thick - 0.095" wide), followed by 0.100" hex, 0.100" hex, 7/32" long, u ndercut shaft to reach bottom slugs in coils. total length: 5-3/32". Limited quantities
Online Price: $1.22

quantity

ALIGNER GC AS-8275 Black Conductive Combination Aligner

ALIGNER GC AS-8275 Black Conductive Combination Aligner

Material: (anti-static) conductive nylon. Shaft: long end 1/8" (3.2mm) diameter, 2-1/2" (6.3cm) long, short end 7/32" (5.5mm) diameter, 2-7/16" (6.2cm) ong. Ends: 1/32" thick screwdriver tip (long end), 1/8" (3.2mm) wide steel tip, recessed 1/16" (short end). Total length: 5". Limited quantities
Online Price: $1.51

quantity

ALIGNER GC AS-5004 Black Conductive Adjustment Screwdriver

ALIGNER GC AS-5004 Black Conductive Adjustment Screwdriver

Material: (anti-static) conductive nylon. Shaft: 1/4" (6.3mm) diameter, 7" (17.7cm) long. Ends: 1/32" thick screwdriver tip (both ends). Total length: 7". For the service or repair of static sensitive components. Limited quantites
Online Price: $0.98

quantity

ALIGNER GC 9440 Square & Hex End Tool

ALIGNER GC 9440 Square & Hex End Tool

Material: delrin, hex 0.100". Ends: 0.100" (2.5mm) hex, 3/8" (9.5mm) long, 1/16" (0.062" 1.6mm) square, 1/32" (0.1cm) long. Total length: 5-1/6". Limited quantites
Online Price: $0.72

quantity

ALIGNER GC 9300 Doubled Sided Hex End Tool

ALIGNER GC 9300 Doubled Sided Hex End Tool

Material: delrin, hex 5/64" (0.078"). Ends: 1/4" long hex, 0.096" diamenter shaft, 3/8" long hex, undercut (0.068" dia) shaft to bottom slugs in coils. Total length: 5". Limited quantities
Online Price: $1.03

quantity

ALIGNER GC 9091 Double Sided Hex End Tool

ALIGNER GC 9091 Double Sided Hex End Tool

Material: delrin, hex 1/8" (0.125). Ends: 7/32" long hex, 3/8" long hex and small scre wdriver tip, 0.100" wide, 0.020" thick. Total length: 5/32". Limited quantities
Online Price: $0.90

quantity

ALIGNER GC 8721 TV 2-in-1 Long Reacah Duplex Aligner

ALIGNER GC 8721 TV 2-in-1 Long Reacah Duplex Aligner

Material: Butyrate. Shaft: 7/32" (5.5mm) diamenter, 9" (22.9 cm) long. Ends: 1/8" (3.2mm) wide steel tip, recessed 1/16". Fits no. 4 slotted stud, 1/8" (3.2mm) wide steel tip, recessed 1/16". Fits no. 6 slotted stud. Total length: 9". Limited quantities
Online Price: $1.40

quantity

POTENTIOMETER/TRIMMER GC 8608 Miniature Potentiometer-Trimmer Adjustment Tool

POTENTIOMETER/TRIMMER GC 8608 Miniature Potentiometer-Trimmer Adjustment Tool

Material: Nylon. Shaft: 1/4" (6.3mm) diameter. 4-5/16" (12.5cm) long. Ends: .085" (2.2mm) wide steel tip, .085" (2.2mm) wide steel tip, recessed .040". Total length: 5". Limited quantities

Online Price: $1.26

quantity

ALIGNER GC 9302 3-in1 Hex Core Tool

ALIGNER GC 9302 3-in1 Hex Core Tool

Material: delrin, hex 5/64" (0.078"). Ends: small (0.078") hex followed by 0.100" hex, 0.100" hex (3/8" long), undercut shaft to reach bottom slugs in coils. Total length: 5-3/8". Limited quantities
Online Price: $1.10

quantity

ALIGNER GC 9297 Hex Tool

ALIGNER GC 9297 Hex Tool

Material: delrin, hex 5/64" (0.078"). Ends: 1/4" long hex, 0.096" diameter shaft, 3/8" long hex, undercut (0.068" dia.) shaft to reach bottom slugs in coils. Total length: 5". Limited quantities
Online Price: $1.65

quantity

ALIGNER GC 9296 Double Sided Hex End Tool

ALIGNER GC 9296 Double Sided Hex End Tool

Material: delrin, hex 5/64" (.078"). Ends: 1/4" long hex, 0.096" diameter shaft, 3/8" long, undercut (0.068" dia) shaft to reach bottom slugs in coils. Total length: 11". Limited quantities
Online Price: $1.43

quantity

ALIGNER GC 9295 Double Ended Long Hex Tool

ALIGNER GC 9295 Double Ended Long Hex Tool

Material: delrin, hex 0.100". Ends: 3/8" long hex, 1/4" long hex undercut (0.090" dia) shaft to reach bottom slugs in coils. Total length: 11".
Online Price: $1.62

quantity

ALIGNER GC 8606-L Hex & Special Tip Tool, Extra Length

ALIGNER GC 8606-L Hex & Special Tip Tool, Extra Length

Same as the 8606 tool except for the longer length.
Material: Delrin, hex 0.100". Ends: flat screwdriver tip (0.27" thick - 0.095" wide) followed by 0.100" hex, 0.100" hex, 7/32" long undercut shaft to reach bottom slugs in coils. Total length: 11-3/32". Limited quantities
Online Price: $1.21

quantity

ALIGNER GC 8606 Hex and Special Tip Tool

ALIGNER GC 8606 Hex and Special Tip Tool

Material: Delrin, hex 0.100". Ends: flat screwdriver tip (0.027" thick - 0.095" wide, followed by 0.100" , 0.100" hex, 7/32" long, undercut shaft to reach bottom slugs in coils. Total length: 5- 3/32". Limited quantities
Online Price: $0.81

quantity

ALIGNER GC 8277 Short Steel Tipped Aligner

ALIGNER GC 8277 Short Steel Tipped Aligner

Material: Butyrate. Shaft: 7/32" (5.5mm) diameter, 2-1/2" (6.3cm) long (each end). Ends: 1/8" (3.2mm) wide steel tip, 1/8" (3.2mm) wide steel tip, recessed 1/16". Fits no. 6 slotted stud. Total length: 2-5/8". Limited quantities
Online Price: $1.40

quantity

ALIGNER GC 8276 Steel Tip Duplex Aligner

ALIGNER GC 8276 Steel Tip Duplex Aligner

Material: Butyrate. Shaft: 7/32" (5.5mm) diameter. 6-1/8" (15.5cm) long. Ends: 1/8" (3.2mm) wide steel tip,
1/8" (3.2mm) wide steel tip, recessed 1/16". Fits no. 6 slotted stud. Total length: 6-1/8" (15.5cm). Limited quantities
Online Price: $1.16

quantity

ALIGNER GC 8271 TV Core Aligner

ALIGNER GC 8271 TV Core Aligner

Material: Butyrate. Shaft: 7/32" (5.5mm) diameter. 6" long. Ends: 1/8" wide tip, recessed 1/16". Fits no. 6 slotted stud, 5/32" (4mm) diameter slotted tip, recessed 1/16". Total length: 6". Limited quantities

Online Price: $1.19

quantity

ALIGNMENT KIT GC 8454 5-Piece Universal Color TV Alignment Tool Kit

ALIGNMENT KIT GC 8454 5-Piece Universal Color TV Alignment Tool Kit

Five different alignment tools for all standard adjustments on color TV sets. All tools are made of Delrin in various colors for easy identification. Tool extender included for those hard-to-reach areas. Vinyl storage pouch.
Contains (1) each: "Extend It" shaft extention. 8282 Zenith alignment tool, 9091 hex iron core tool, 9300 hex core tool, 8606 hex wrench 5", 9304 double end tool. Limited quantities
Online Price: $3.99

quantity

MAGNA TUNING TOOL GC 8284 Magna Tuning Tool

MAGNA TUNING TOOL GC 8284 Magna Tuning Tool

Material: Delrin, hex 0.100". Ends: flat screwdriver tip (0.027" thick - 0080" wide) followed by 0.080" hex, 0.100" hex, 7/32" long undercut shaft to reach bottom slugs in coils. Total length: 5-1/8". Limited quantities
Online Price: $0.79

quantity

ALIGNER/SCREWDRIVER GC 9294 16" Double Ended Extra Long Screwdriver

ALIGNER/SCREWDRIVER GC 9294 16

Material: fiberglass. Shaft: 5/32" (4mm) diameter, 16" (40.6cm) long. Ends: 1/32" thick screwdriver tip (both ends) Total length: 16". Limited quantities
Online Price: $1.90

quantity

ALIGNER/SCREWDRIVER GC 5000 Metal Tip Alignment Screwdriver

ALIGNER/SCREWDRIVER GC 5000 Metal Tip Alignment Screwdriver

Material: Butyrate. Shaft: 7/32" (5.5mm) diameter. Ends: 1/8" (3.2mm) wide steel tip. Total length: 6-1/8" (15.5cm). Limited quantites
Online Price: $0.99

quantity

ALIGNER GC 5097 K-Tran Tool

ALIGNER GC 5097 K-Tran Tool

Material: Delrin. Shaft: long end 1/8" (3.2mm) diameter. 1-1/2" (3.8cm) long, short end 5/32" (4mm) diameter
1" long. Ends: 1/32" thick screwdriver tip (long end). 1/16" thick screwdriver tip (short end).
Total length: 6" (15.2cm). Limited quantities
Online Price: $1.40

quantity

ALIGNER GC 9304 Hex Screwdriver Combination

ALIGNER GC 9304 Hex Screwdriver Combination

Material: delrin, hex 5/64" (0-.078"). Ends: small (0.078") hex followed by 0.100" hex, 0.100 hex (3/8" long), undercut shaft to reach bottom of slugs in coils. Total length: 5-3/8". Limited quantites
Online Price: $1.10

quantity

ALIGNER/SCREWDRIVER GC 9293 Double Ended Long Screwdriver

ALIGNER/SCREWDRIVER GC 9293 Double Ended Long Screwdriver

Material: fiberglass. Shaft: 5/32" (4mm) diameter, 12" (30.5cm) long. Ends: 1/32" thick screwdriver tip both ends. Total length: 12". Limited quantities
Online Price: $1.68

quantity

ALIGNER/SCREWDRIVER GC 8988 14-3/8" Long Reach Screwdriver with Plastic Handle

ALIGNER/SCREWDRIVER GC 8988 14-3/8

Material: fiberglass. Shaft: 1/8" (3.2mm) diamenter, 12" (30.5cm) long. Ends: 1/32" thick screwdriver tip, 2-3/8" (6cm) long screwdriver handle. Total length: 14-3/8". Limited quantities
Online Price: $2.44

quantity

ALIGNER/SCREWDRIVER GC 8987 9-3/8" Screwdriver with plastic handle

ALIGNER/SCREWDRIVER GC 8987 9-3/8

Material: fiberglass. Shaft: 1/8" (3.2mm) diameter, 7" long (17.7cm). Ends: 1/32" thick screwdrivertip, 2-3/8" (6cm) long screwdriver handle. Total length: 9-3/8". Limited quantities
Online Price: $1.69

quantity

ALIGNER GC 8282 Hex-Screwdriver Combination

ALIGNER GC 8282 Hex-Screwdriver Combination

Material: Delrin, Hex 0.100". Ends: Screwdriver (plastic) 1/8" blade, 1/4" long hex, undercut (0.095" dia) shaft to reach bottom slugs in coils. Total length: 5-7/16". Limited quantites
Online Price: $1.05

quantity

SYRINGE APPLICATOR GC 8887 Chem-O-Jector Syringe-Type Applicator

SYRINGE APPLICATOR GC 8887 Chem-O-Jector Syringe-Type Applicator

Plunger type applicator for all grease type or semi-liquid chemicals. Made of polyethylene with neoprene plunger. Unaffected by most chemicals. 5-1/2" oal with plunger extended. 6cc (2 oz.) Limited Quantities
Online Price: $1.25

quantity

SPLINE WRENCH KIT GC 5070 Spline Key Wrench Kit

SPLINE WRENCH KIT GC 5070 Spline Key Wrench Kit

L-wrench kit of 6 popular "spline" type wrenches for use on many electronic devices. Made of alloy steel. Tools fit No. 4 to 1/4" set screws and No. 2 to No. 8 cap screws. vinyl pouch. Limited quantites
Online Price: $4.50

quantity

CABLE TIE GUN GC 12-472 Cable Tie Gun

CABLE TIE GUN GC 12-472 Cable Tie Gun

Economical cable tie installation tool is lightweight. User controls tension and cuts tie with a 180-degree rotation of the tool. Molded plastic construction. Limited Quantities
Online Price: $2.05

quantity

KNURL-NUT WRENCH GC 9359 Knurl-Nut Wrenches

KNURL-NUT WRENCH GC 9359 Knurl-Nut Wrenches

Tightens and loosens knurled finish nuts. Collet-type pressure jaws provide positive vise-like grip. Reverse quarter turn loosens jaws and drops nut. 1/16" adjustment takes finish nuts of slightly less or greater size. Hollow collect barrel fits the long shank of many toggle switches. Limited quantites
Online Price: $9.99

quantity

Online Catalog | Specials | GC Tools